Wallpaper

Our wallpaper is made of strong paper with a fibreglass layer. The paper is 120gsm. It can be applied to a wall, typically without any preparation, and is very easy to apply. The big advantage of our wallpaper is that it can be applied without a wallpapering table. In addition, compared to traditional wallpaper, it is much stronger. It does not shrink and it is almost impossible to get any cracks.

Non-woven wallpaper is printed on rolls of approximately 50 cm.

In principle, it can be done (provided the wallpaper is very well attached), but we advise against it. Especially if your wallpaper is a dark colour, as the colour of your previous wallpaper may show through.

No, an important requirement for non-woven wallpaper is that the wall must be mirror-smooth.

Do you have a freshly plastered wall? Then first apply a moisturising layer, e.g. Perfax Roll On or primer. This will prevent the glue from being sucked into the wall and your print will remain even.

You can order any size from us! OK the minimum size is 50x47.5cm. From this size onwards, simply enter the dimensions you want and we will divide this into 47.5cm strips. Simple isn't it?

With wallpaper, the wall is leading of the size. Want to see in advance how your size fits a work? Then get in touch with us. We will be happy to make an example for you.

It is possible to have a photo printed through us. However, it is important that this photo was taken with a good camera in high resolution and that you are the rightful owner of the photo.

Is this both the case? Upload your photo here and select the size and material you have in mind.

Wallpaper paste for extra-heavy, special and non-woven wallpaper from Bison. Or use Perfax pink. You can easily order the matching wallpaper glue via your shopping cart.

Non-woven wallpaper is printed in 47.5cm rolls. As the basic material is sturdy, pasting is made much easier with stretching kept to a minimum. Simply apply the paste to the wall (no need for a table) and affix it one strip at a time. The durability of the paper should ensure that it does not tear or shrink. Before you start sticking the wallpaper, check the prerequisites for a sleek finish:

• Is your wall clean, dry and smooth? Then there should be no problems!
• Apply on a light (white) background, this way you ensure that the colour of the background is not visible through the wallpaper.
• For non-woven wallpaper we recommend wallpaper paste for extra heavy, special and non-woven wallpaper from Bison. Or use Perfax Pink. You can find this at any hardware store.
• Do you have a very absorbent wall? Then use an adhesive primer or other primer to ensure that the glue remains on the wall’s surface. This also prevents the wallpaper from shrinking and creating unsightly seams. A tip for testing, whether a wall is absorbent or not: spray it with a plant sprayer, if the water is absorbed into the wall then you should consider a primer.
• While applying wallpaper, make sure the temperature in the room is as normal as possible. It is preferable not to apply wallpaper in extreme cold or heat.

Would you rather see how it’s done? Watch a handy Youtube video here.

• Your favourite artwork is printed on wallpaper in strips of 50 cm.
• The wallpaper is printed as one long roll. With the strips following each other premarked with the correct numbers and spacing; you simply cut where directed. There are instructions at the top of the roll.
• As standard, we supply the wallpaper with extra margin, so that you can crop the wallpaper precisely. The margin is an extra 5 cm on each side.
• Use the right glue: Perfax pink or Bison
• Our wallpaper is strong, tear-resistant and doesn’t shrink
• Read the instructions on how to prepare your wall carefully. These tips can be found in the FAQ below and will be sent to you by e-mail when you place your order.

Non-woven wallpaper is printed in 47.5cm rolls. As the basic material is sturdy, pasting is made much easier with stretching kept to a minimum. Simply apply the paste to the wall (no need for a table) and affix it one strip at a time. The durability of the paper should ensure that it does not tear or shrink. Before you start sticking the wallpaper, check the prerequisites for a sleek finish:

• Is your wall clean, dry and smooth? Then there should be no problems!
• Apply on a light (white) background, this way you ensure that the colour of the background is not visible through the wallpaper.
• For non-woven wallpaper we recommend wallpaper paste for extra heavy, special and non-woven wallpaper from Bison. Or use Perfax Pink. You can find this at any hardware store.
• Do you have a very absorbent wall? Then use an adhesive primer or other primer to ensure that the glue remains on the wall’s surface. This also prevents the wallpaper from shrinking and creating unsightly seams. A tip for testing, whether a wall is absorbent or not: spray it with a plant sprayer, if the water is absorbed into the wall then you should consider a primer.
• While applying wallpaper, make sure the temperature in the room is as normal as possible. It is preferable not to apply wallpaper in extreme cold or heat.

Would you rather see how it’s done? Watch a handy Youtube video here.

No, a table is not necessary. Simply apply the paste to the wall and hang the rolls one at a time.

Wallpaper paste for extra-heavy, special and non-woven wallpaper from Bison. Or use Perfax pink. You can easily order the matching wallpaper glue via your shopping cart.

• Your favourite artwork is printed on wallpaper in strips of 50 cm.
• The wallpaper is printed as one long roll. With the strips following each other premarked with the correct numbers and spacing; you simply cut where directed. There are instructions at the top of the roll.
• As standard, we supply the wallpaper with extra margin, so that you can crop the wallpaper precisely. The margin is an extra 5 cm on each side.
• Use the right glue: Perfax pink or Bison
• Our wallpaper is strong, tear-resistant and doesn’t shrink
• Read the instructions on how to prepare your wall carefully. These tips can be found in the FAQ below and will be sent to you by e-mail when you place your order.

In principle, it can be done (provided the wallpaper is very well attached), but we advise against it. Especially if your wallpaper is a dark colour, as the colour of your previous wallpaper may show through.

No, an important requirement for non-woven wallpaper is that the wall must be mirror-smooth.

Do you have a freshly plastered wall? Then first apply a moisturising layer, e.g. Perfax Roll On or primer. This will prevent the glue from being sucked into the wall and your print will remain even.

Unfortunately this is not a service we currently offer.

When it is very hot outside and you start wallpapering in this temperature, you will end up with seams. Therefore, the ideal temperature for wallpapering is 23 degrees maximum.

The non-woven wallpaper is lightly wipeable with a soft cloth. Any glue spots can be removed immediately with a wet cloth and dabbed dry afterwards.

In general, you will receive the package between 5 and 8 working days. Are you in a hurry? Get in touch with us!

As one long roll, the wallpaper is printed. All strips come one after the other, marked with the correct numbers and spacing, you just have to cut them loose. The width of the strip is always 47.50 cm. There are instructions at the top of the roll.

The wallpaper is sent in sturdy packaging. A courier will collect the parcel from us and deliver it directly to your home or office. We work with couriers who are used to handling fragile packages, so that's fine.

Not at home? Then the delivery driver will leave a note and an appointment can be made to schedule a new delivery.

Of course, something can always happen during a shipment. However, if your parcel is damaged during transport, please contact us and we will solve this quickly and correctly.